|
If engine runs-on (diesels) after ignition is turned off, repair as follows:
- Disconnect battery
- Under dash, remove hose from left air vent
- Remove alternator indicator light
- Disconnect blue wire from indicator light, connector 61
- Cut new wire (16 gauge) 5 - 6 inches long
- Attach male and female push-on connectors
- Connect new wire to diode (Part #059 905 371)
- Connect female connector of diode to alternator
indicator light and new wire to blue wire
- Install indicator light
- Tape diode and wire to wiring harness
- Install fresh air hose
- Connect battery
- Road test vehicle. Engine should not diesel when
turning ignition off
|
|